YouTube

How to install trunk on Super Soco TC Max - Tutorial

Creator: BB Walker TV (claimed) Clicks out: 13
▲ 0 ▼ Create an account to rate this video

This video demonstrates how to fit a Shad top mount to a Super Soco TC Max electric motorcycle using the Shad KIT TOP S0TC11ST. This mount can be used to install the mounting plate for Shad SH26 to SH36 trunk models, or top trunks from other manufacturers such as Kappa. Chapters 0:00 Intro 0:16 Shad Top mount kit parts 1:16 Removing rear hold nuts 1:55 Installing mount rack for top trunk 4:44 Outro BB walker #supersoco #motorcycle #shad

Performance

Views and click-outs

3
Page views (all time)
13
Click-outs to YouTube (all time)
433.3%
Views that turn into a click (all time)
last 14 weeks
Page views Click-outs Views counted since 15 Nov 2026.

Questions this video answers

What parts are included in the trunk rack kit?

The trunk rack kit contains several components required for installation. The main part included in the package is the shot top mount. You will also find two long screws, one metal plate connector, and two short screws. The kit further includes two sleeves, six metal washers, two spring washers, and two nuts.

What tools are needed to remove the back part of the frame?

To remove the back part of the frame, you first need to remove the rubber plugs that hide the screws. Once the plugs are removed, you will need a size 6 Allen key to remove the bolts. You should keep the original screws and rubber plugs in case you want to return the bike to its original condition. Be careful when unscrewing so that the elements do not fall off and damage your scooter.

How do I install the black frame into the holes?

Insert the black frame into the screw holes, though it may be a bit tricky to fit perfectly at first. You should prepare the two long screws and washers first and place them in the rack before you begin. Start by screwing the bolts with your bare hands to catch the hook so the parts stick together. Then, use an allen wrench to fully tighten the bolts. Make sure the rubber elements are resting on the silver plated rear frame of the motorcycle to prevent damage.

How should I tighten the bolts during assembly?

To assemble the rack, first prepare the two long screws and washers and place them in the rack. Start by screwing the bolts with your bare hands to catch the hook so the parts stick together. Next, use an allen wrench to fully tighten the bolts. Make sure the rubber elements are resting on the silver plated rear frame of the motorcycle to prevent damage to the silver paint and absorb shocks. Finally, tighten the long screw to the end.

Why should the rubber elements rest on the silver plated rear frame?

The rubber elements should rest on the silver plated rear frame of the motorcycle. This is important because it helps to prevent damage to the silver paint. Additionally, these elements are designed to absorb some of the shocks from the trunk. Ensuring they are correctly positioned protects the motorcycle's finish during use.

How do I install the additional protection screws?

To install the additional protection screws, take the two shorter screws, put washers on them, and insert them into the mounting holes from above. Use a metal fastener and a connector, catching them lightly with one net with your bare hand. Add a metal washer and tighten the first nut until it is holding. Tighten the second nut using a size 13 wrench to counter the nut from the bottom and a five Allen key range from above. Finally, check that everything is stable and not shaking once everything is tightened firmly.

What tools are needed to tighten the nuts from the bottom?

To tighten the nuts from the bottom, you need to use a size 13 wrench. You should also use a five Allen key range from above to counter the nut. After everything is tightened firmly, check that the installation is stable and not shaking. This ensures the trunk rack and mounting plate are correctly installed.

This video is managed by its uploader
Ownership

Is this your video?

This video is managed by its uploader. If you are the rightful owner, write to video@taplic.com and we will look into it.

Comments 0

Join the discussion. Create a free account or log in to comment and vote. It takes a few seconds, and it is free.

No comments yet. Be the first to say something.